Embadecor Wood Stain
Embadecor Wood Stain is suitable for all our timber products including our beautiful Log Cabins, Gazebos fencing etcetera.
In total, there are 14 colours of stains to choose from all available in 2.5-litre tins.
Embadecor Wood Stain is solvent based and very easy to apply.
All untreated wood must be treated as soon as possible before or after installation.
The Embadecor Wood Stain is highly recommended for all untreated wood and is our recommendation for our log cabins.
The Brand name is Embadecor and is known as a high-quality stain which sold across Europe.
Features of Embadecor Wood Stain:
- Moisture wicking
- Water repellent
- Prevents blistering
- Handles and applies effortlessly and smoothly
- UV Resistant
- Flat Silk Finish
- A thickness of about 40 mu dry per coat. Ideal thickness of finished treatment is 120 mu
- Stated coverage is 16m² – 18 m² per litre.
Use of Embadecor:
- At least two coats are necessary on untreated wood. Ideally, three coats should be applied.
- Sand lightly between coats for the best results
- Embadecor is solvent based and can be thinned
- Drying time is between 18 – 24 hours
- Undercoat
This wood stain is recommended as an undercoat for our solid Embalan wood paint
Colours Available:
- 38.2600 Clear
- 38.2601 Swedish Red
- 38.2602 Light Pine
- 38.2603 Pine
- 38.2604 Light Oak
- 38.2605 Rustic Oak
- 38.2606 Teak
- 38.2607 Walnut
- 38.2608 Ebony
- 38.2609 Pine Green
- 38.2610 Chestnut
- 38.2611 Mahogany
- 38.2612 Silver Grey
- 38.2613 Rosewood
** Important Note: The colours that are shown on our website and in our Catalogue will not be a precise match to the actual colour produced. PLEASE carry out a test on a piece of scrap wood before use.
Notes:
If a log cabin is closed up on a regular basis and is not well ventilated, nor has a Damp Proof Membrane, we always recommend treating the interior of the cabin. It is good practice to paint the interior of the windows and doors to stabilize the wood in high and low relative humidity.
The application of three coats applied liberally is recommended and should in our humble opinion be four coats. It is advisable to treat the doors and windows inside and outside to stabilize the wood and guard against warping.
For our beautiful log cabins, we recommend at least three coats and please pay particular attention to all the joints and apply the stain liberally in all these areas especially the corner joints, windows and doors. Of course, it is best to treat the cabin before installation, but we appreciate this is not always practical.
Approximate Delivery Time: 25 – 30 Working Days
Reviews
There are no reviews yet.